大家好，在这个视频中，我们将了解美国
Hello, in this video, we will learn the U.S.

电源，好的，让我们从这里开始。
power supply, OK, and let's start in here.

我们有联系 D.C.
We have contact D.C.

电源好不好？
power supply, OK?

你会在底部侧光中看到这里。
And you will see in here in the bottom side light.

这是我们输入的交流电压。
And this is our input of AC voltage.

220 或 30 或 40 WALLKILL，您可以在这里看到 240 伏，线路和自然以及我们的地面和该设备的下侧，您将看到输出为直流电。
Two hundred and twenty or thirty or forty WALLKILL, you can see two hundred and forty volt here and line and nature and our ground and the lower side for this device you will see the output as DC.

那么它需要什么电源。
So what power supplies to it will take.

它达到交流电压。
It gets to AC voltage.

我们的线路电压为 220 伏。
Two hundred and twenty voltage from our line.

好的，它将交流电源转换为直流电源。
OK and it is convert or AC power to DC power.

好的。
OK.

所以在输出中我们有直流电。
So in the output what we have we have direct current.

一开始我们有交流电。
In the beginning we have alternating current.

在这个设备的末端，我们有直流 24 伏电源，最大功率在佩里的三点五安培上输出，在上侧，我们有负输出。
At the end of this device, this power supply we have direct current 24 volt and the maximum power is output on Perry's three point five amper OK in the upper side in here we have minus output.

在这里我们有正输出。
In here we have plus output.

好的，当我打开该设备时，您会看到直流电正常。
OK, and you will see when I powered on this device, the DC is OK.

所以有一个直流输出工作正常。
So there is a DC output is correctly working.

好的，在这里您已经完成了此输出以转发输出是可调的。
OK, and also in here you've done this output to forward output is adjustable.

怎样才能适应。
How can be adapted.

例如，如果我在这里测量它，也许我可以将我的设备通过这里，就像这样。
For example, if I measure it in here and maybe I can put it my device through here like this can be it to like this.

好吧，现在它是零，如果我用我的测量它。
OK, now it is zero and if I measure it with my.

首先，让我们。
And first of all, let us.

稍微修复一下。
Fix it a little bit more.

好的好的。
OK, OK.

作为输出，我们将看到我们现在听到的内容，例如，正在测量。
As an output, we will see what we hear now, for example, that is measuring.

这是佩洛塞，这是负号，好吗？
And this is Pelosse, and this is minus OK?

所以你在这里我们有 24。
So what you here we have 24.

好的，如果我将可调输出从这里更改为左侧，好的，那就是使其向左，然后向左，向左，向左，向左。
OK, and if I changed my adjustable output from here to the left side, OK, that is make it to the left, then left and left and left and left.

好的，现在我们到这里来测量一次。
OK, and now let's go to here and let's measure it once.

所以现在你会看到它是 19 或 19 或 20 倍。
So now you will see it is 19 or 19 or 20 fold.

好的，所以我们改变左侧。
OK, so we change the left side.

现在更低了。
It's lower now.

它下降了，这增加了我们的输出电压。
It's dropped and this increase our output voltage.

就像右边一样。
Like the right side.

好的，我暂时转向右侧。
OK, I am turning to the right side for a moment.

好的，现在我也可以为你做这件事。
OK, and now also I can do this thing for you just a second.

我会。
I will.

我想把它展示给你看。
I want to show it to you like.

如果是正确的话。
If it is correctly.

停在这里。
Stops in here.

这一点非常重要，如果你需要随时计算它，你可以使用这个策略。
This is really important, if you need at any moment to calculate it, you can use this tactic.

好吧，让我们把心思放在这里。
OK, let's put our minds to here.

并采取了。
And took.

好的，现在您可以看到所有测量结果，让我们更改我们的 D.C.
OK, now you can see all of measuring and let's change our D.C.

将此输出输入到右侧，好吗？
input on this output to right side, OK?

写啊写啊写啊写。
And write and write and write and write.

你可以看到它正在增加，好吧。
And you can see it is increasing, OK.

目前是二十六点，还有二十七点。
Twenty six for the moment and twenty seven.

例如，在右侧。
And to the right side, for example.

还有二十七。
And twenty seven.

稍微右侧用修剪锅采用二十八。
A little bit right side with the trim pot adopt twenty eight.

好的，我们可以下去了。
OK and we can go down.

回去再乞讨再乞讨。
Go back and beg and beg.

所以现在你会看到25、24，我们就是这个报告和这些可调节的可调节区域，我们可以采用我们的但是现在我们有稳定的直流24伏输出。
So now you will see 25, 24, we are this report and these adjustable adjustable area, we can adopt our but okay now we have stable DC 24 volt output.

好的，现在这个。
OK, and now this.

好的，这就是转换器。
OK, this is the converter.

好的，我们正在将交流电改为直流电。
OK, and we are changing alternating current to direct current.

也许有点专注。
Maybe a little bit focused to.

为你带来美好的愿景。
Good vision for you.

好的。
OK.

那么你能从加号输出中做什么呢？
And then what can you do from the plus output?

好吧，你可以把它带到，例如，直流配电箱，我们的配电箱，好吧，还有两个减号以及它是如何工作的。
OK, you can take it to, for example, distribution box for DC, distribution box to us, OK, and two minus and how this is working also.

例如，让我们把这个直流电源做好，现在我们要做什么。
For example, let's make this DC power supply of OK, and now what will we do.

我会成功的。
I will make it.

像这样。
Like this.

好的，现在我们准备好了，我将打开万用表。
OK, so now we are ready and I will put my multimeter to.

短路情况。
Short circuit situation.

好的，现在你可以看到了。
OK, now you can see.

这是短路情况，现在我们该怎么办？
It is a short circuit situation and now what will we do?

我们会测量它，好吧，例如，在这里你会看到这是负的一面，好吧，并且。
We will measure it, OK, for example, in here you will see this is the minus side, OK, and.

分配有短路，但随后可以找到它。
There is a short circuit for the distribution, but then you can find it.

好的，减去N减，现在你也可以测量它想要通过找到加号，左边就可以了。
OK, and minus N minus and now also you can measure it wants to pass to find the plus and the left side is OK.

还有加号，现在有加号就OK了。
And plus and now there is a plus and OK.

这是对的。
This is correct.

所以这就像这是减去相反的。
So this is like this is minus the opposite.

这也是加起来，这两个是减，加起来加减减加减加加。
And this too is plus altogether and this two is minus altogether plus plus and minus minus and minus and plus.

这是您可以找到的配电箱，现在您可以使用交流输入作为输出，您可以将其传输到您的示例。
This is the distribution box that you can find and now you can use your AC input to as the output from here you can give to transferral to your for example.

好的，例如，这里是类似的拆分，它需要测试 ADC 输入，以便您可以在电源供电后获得正负值。
OK, so this is for example, similar split here and it needs to test for what, the ADC input so you can get your plus and minus after your after your power supply.

但是，如果您仅使用这些输出，那么这两个输出对您来说是不够的。
But if you use these outputs only and these two output will not enough for you.

所以你需要使用这样的配电箱或这样的克莱门斯。
So you need to use distribution box like this or klemens like this.

好的，所以你可以使用很多，你可以分配你的 24 伏。
OK, so you can use a lot, you can distribute your 24 volt.

我们就是这些外部设备和额外的设备。
We are these external devices and extra devices.

好的，我已经完成了这个视频。
OK, so I have finished for this video.

下一个视频见。
See you in the next video.